Generator From Motor. Very Simple.

Generator From Motor. Very Basic Model.

Here we used two 12 Volts toy/ Old Tap-recorder Motors(From trash). One as a Motor ( Turbine) and other one as a Generator/alternator. A white LED is connected as a Load to the Generator Output.

Note That this is seems to be a Motor-Generator Set, but No.. Because Motor-Generator Set ( AC Motor and DC Generator) used as a Convertor (AC to DC and vice versa), and here we used it for glowing an LED ( For showing that how can we use a DC motor as a DC Generator).

Here, we are going to step by step procedure.

Requirements:

• 2 Toy or Old Tap recorders Motor (one as a motor and other as a generator)
• 1 LED
• One big rubber band as a belt
• 2 pulleys (one small and other is large one)
• Flexi wire
• 4 screws
• Wooden piece
• Metal strip

Procedure:

• Install both motors (one as a motor and other one as a generator) on wooden piece tightly by metal strip and tight the screws.
• Connect both motors (one as a motor and other one as a generator) by rubber band or belt which is fixed in the pulley.
• Connect an LED to the generator output (Red and black)
• Connect the motor with 12VDC, and run it as a turbine. It will rotate the armature of generator by belt and current will produce in the generator that will glow the LED.

Pics